Tag: Colorado

State Your State!

State-JerseyWant to show some state pride while you ride? Pactimo’s new line-up of cycling jerseys includes design’s for California, Colorado and New York. Each State jersey features a full length YKK zipper along with hidden elastic sleeve openings, and a silicone gripper at the waist. These new 2014 jerseys are also quipped with the standard three rear pockets, while the jerseys even have a race radio earpiece opening in the rear pocket with a cord loop in the collar.

We’re not sure if more states will follow, but Pactimo could certainly help encourage a race between the states!

Pactimo State Series Official Website

Serious Tool Time

Having the right tool for the job certainly makes doing the job easier, and we’ve seen a trend in multi-purpose tools that not only get the job done but could likely survive the end of the world. Last week we reported on the Crovel, the shovel that seems ready for the zombie apocalypse or worse. Now we heard about the TNT Emergency Survival Tool, a combination axe, sledgehammer, do anything that requires blunt force device.

Designed by two fireman in Colorado this tool can pick, pry, hook, ram, pound and chop. It is made of high-carbon, heat-treated steel, along with a solid fiberglass handle. While it will require some muscle and putting your back in it the TNT Emergency Survival Tool might be the next best thing to dynamite.

T-N-T Tools Official Webstite

Made in America: Belle Baby Carriers

In the next few months life as we know it is going to change – this reporter and my wife are expecting a newborn, our first. The preparations and gathering of baby related products has started at our household, and as exciting as this is for us, there is a disturbing trend that we noticed in this entire industry – a majority of the products are made in China. Certainly there are products manufactured in other countries, Mexico, Vietnam and South Africa to name a few; but we have not found one baby related product that is made in the U.S.A. – until now. Belle Baby Carriers of Boulder, Colorado has been making baby carriers for those on-the-go since 2006 and they are all made in America.

The idea of carrying a baby close to a parent’s chest is not a new concept. It keeps the newborn close to the parent promoting ‘bonding’ during the first few months of development outside of the womb. For the parents, it allows the newborn to be easily carried during the first few months without the hassle of a stroller or jogger. Video after the jump

SIA: Carbon Fiber Meets the Trail with the ‘Kilo’ from Crescent Moon

Skis, snowboards, poles and boots – these are just a few of the winter sport items that use carbon fiber in their construction. Carbon fiber has been the material of choice for higher end equipment due to its high strength to low weight ratio. Not only is it light weight and strong, but it is the type of material that can make an overall product stronger by adding additional layers in higher stress areas. Wanting to tap into the advantages of this material, Crescent Moon of Boulder, Colorado is in the process of testing their newest and lightest snowshoe, the Kilo.

The new Kilo is simply named after its weight – 2.2-pounds with bindings for both pairs, making them easily one of the light pair of snowshoes on the market. Crescent Moon is not new to the snowshoe market, they have been around since 1997 and primarily use aluminum in the construction of their frames. At the SIA show this year, they are showcasing the Kilo that is uses carbon fiber in the construction of the entire frame of this snowshoe. Continue reading SIA: Carbon Fiber Meets the Trail with the ‘Kilo’ from Crescent Moon

Thursday Reading List (12/15/2011)

 

Creative Radio

Two innovative podcast programs worth a listen are Radiolab  and 99% Invisible. Get a view into each at the same time as Radiolab does a story about 99% Invisible, a tiny radio show about design, architecture & the 99% invisible activity that shapes our world.

The rest of the Reading List

Made in America: DiEM Sportsgear

Name one company that gives away 30-percent of its profits. There aren’t many out that that would dream of such an act, but DiEM Sportsgear is not a normal company. They are a company that was launched earlier this year to supply a non-profit fund with money to achieve its main goal of giving back to the community. The non-profit, David’s Fund, was started by the family members of the young athlete, David Scott Mueller, whose life was cut tragically short in 2009 by a drunk driver in Colorado Springs, Colorado.

DiEM Sportsgear, the name derived from David’s initials, not only is unique with its goal of giving back, but they also pride themselves on making their apparel in the U.S.A. Currently the line only consists of athletic t-shirts for both men and women. Every shirt except for the ‘Basic T’ utilizes fast-dry fabric technology, are tag-less and are 92-percent polyester, 8-percent spandex. All T’s sold by DiEM Sportsgear are made in America.

Video after the jump Continue reading Made in America: DiEM Sportsgear

KineticShift Rides Stage 2 of the USA Pro Cycling Challenge and Comes Back with Spectator Info!

(Video by Mike Prendergast) For a higher resolution video click here

From August 22nd through August 28th, one of the biggest professional cycling races in the United States will commence in Colorado Springs. This is one of the largest U.S. stage races in recent years, drawing international stars like Cadel Evans and the Schleck brothers to do battle on our soil, with our heroes including Levi Leipheimer, George Hincapie and Colorado favorite, Tom Danielson. KineticShift.com will be there; and actually we have already been there and had a chance to pre-ride Stage 2, the ‘Queen Stage’ of the USA Pro Cycling Challenge (UPCC).

At 131 miles and with two 12,000-foot mountain passes, Stage 2 of the UPCC will arguably be the hardest day of racing for the pros due to the altitude, length and unpredictable Colorado weather. Experience it here from a rider’s view as we climb, descend and film our way through the Queen Stage… returning with some interviews and insight for you!

This week’s coverage:

The Riding of Stage 2 of the USA Pro Cycling Challenge – Part 1: Gunnison to Buena Vista
The Riding of Stage 2 of the USA Pro Cycling Challenge – Part 2: Buena Vista to Aspen
Watching the Queen Stage – Spectator Information for Gunnison to Buena Vista
Watching the Queen Stage – Spectator Information for after Buena Vista to Aspen
Inspired by the USA Pro Cycling Challenge to Climb Some Colorado Mountain Passes?
USA Pro Cycling Challenge: Strider World Cup Answers the Challenge

 

Continue reading KineticShift Rides Stage 2 of the USA Pro Cycling Challenge and Comes Back with Spectator Info!

Inspired by the USA Pro Cycling Challenge to Climb Some Colorado Mountain Passes?

Colorado Bicycle Climbs Locator Map

After watching the great coverage on Versus or NBC of the USA Pro Cycling Challenge (UPCC), you may be inspired to come out to Colorado and tackle some of the highest, paved passes in the country. One of the great cycling experiences in the state of Colorado is climbing in the mountains, but it is difficult to pick your routes with just a road map. The state has a tremendous selection of canyons, passes and mountains to ascend with some of the most breathtaking views imaginable. Over the years my wife and I have been drawn to climb many of the passes and “classic climbs” in the state. We started in the San Juan mountains of southwest Colorado climbing Coal Bank, Molas and Red Mountain.

(Video after the jump)

Continue reading Inspired by the USA Pro Cycling Challenge to Climb Some Colorado Mountain Passes?

USA Pro Cycling Challenge: Spectator Information for Stage 2 – Buena Vista to Aspen

Top of the last climb of Stage 2 - Independence Pass

The second half of Stage 2 of the USA Pro Cycling Challenge is not going to be any easier to get around and watch than the first half from Gunnison to Buena Vista, but that doesn’t mean it isn’t worth trying.

Not only will you get to see some great cycling in action, you’ll be treated to some of the most scenic beauty that ‘Colorful Colorado’ has to offer.

After riding this stage (The Riding of Stage 2 of the USA Pro Cycling Challenge – Part 2: Buena Vista to Aspen), we agree that a much better viewing experience is to be had by selecting a spot and soaking in the action. The following are our thoughts regarding spectating of this stage for the portion after Twin Lakes.

Continue reading USA Pro Cycling Challenge: Spectator Information for Stage 2 – Buena Vista to Aspen

USA Pro Cycling Challenge: The Riding of Stage 2 – Part 2: Buena Vista to Aspen

The racers pass Twin Lakes at about mile 93, but still have 17 miles and 2,500 feet of climbing to the summit of Independence Pass

We continue our coverage of the “Riding of Stage 2 of the USA Pro Cycling Challenge” (The Riding of Stage 2 of the USA Pro Cycling Challenge – Part 1: Gunnison to Buena Vista)

Once my cleat malfunction was addressed in Buena Vista, Mike Prendergast and I continued our ride of Stage 2 of the USA Pro Cycling Challenge. At this point, we were 67 miles into the 131 mile stage from Gunnison to Aspen. From Buena Vista at 7,965 feet, we had almost 43 miles until we reached Independence Pass at 12,095 feet – the Continental Divide for the second time. As we rolled out of Buena Vista, the skies did not look so good. With only a couple of tiny sections of blue sky, dark clouds started to form and the wind started to pick up. US-24 closely follows the Arkansas River for almost another 20 miles, but only climbs about 1,100 feet. Though this road is very heavily traveled, there is a wide shoulder for most portions of this section of the stage – not important for the racers as the road will be closed, but nice if you are just out for a ride. There is some nice scenery even though this section is a grind… it is probably the least enjoyable section of the ride due to the traffic and winds. As we approached Granite, the grade increased slightly, but it felt easier. From Granite up to CO-82, the grade or reduced headwind allowed for a large chain ring climb to the turn at CO-82. Continue reading USA Pro Cycling Challenge: The Riding of Stage 2 – Part 2: Buena Vista to Aspen

USA Pro Cycling Challenge: Spectator Information for Stage 2 – Gunnison to Buena Vista

12,126 feet above sea level on Cottonwood Pass

If you can’t ride the course with the pros, the next best thing is watching them in action, and next week you can get your chance if you head out to Colorado to watch the “Queen Stage.” After riding the course (The Riding of Stage 2 of the USA Pro Cycling Challenge – Part 1: Gunnison to Buena Vista), we thought we’d share our thoughts on the best way to take in the course.

With road closures and traffic, it is going to be quite a feat to see Stage 2 of the USA Pro Cycling Challenge (UPCC) from both the start in Gunnison and the finish in Aspen. For the brave or those who would rather sit in a car than hang out at the host cities, there is a route that is only a 2.5 hour drive. Getting out of Gunnison, driving the distance between both cities, finding parking in Aspen and hoofing it to the finish line is going to be tough. After riding the stage, we agree that a better spectating experience will be had by not trying to see both ends of the stage. The following is our thoughts with regards to viewing along the first half of Stage 2. Continue reading USA Pro Cycling Challenge: Spectator Information for Stage 2 – Gunnison to Buena Vista

USA Pro Cycling Challenge: The Riding of Stage 2 – Part 1: Gunnison to Buena Vista

 

City of Gunnison - The start of Stage 2 of the USA Pro Cycling Challenge

With our plans in place to ride the USA Pro Cycling Challenge, Mike Prendergast and I left our homes on the Colorado Front Range and began our journey with a four hour drive to Gunnison. We chose to make the trip late on a Wednesday, meet the representatives from Gunnison and roll out early Thursday morning for the ride. We arrived in Gunnison with enough time to check in to our hotel, drop our bags, shoot some video of the city and make it to Garlic Mikes for dinner.

We met with four representatives on the Gunnison side of Stage 2, Joellen Fonken, Petra St. George, John Messner and Jon Brown, all who had various roles in bringing the stage to Gunnison. John Messner, the Facility and Events Manager for the City of Gunnison, was a major driving force behind the task of securing a stage and explained to us that it was not the race organizers who proposed the stages, but each town and city in Colorado had the opportunity to submit a bid outlining four to five different stage routes through their community. Gunnison submitted a number of options including one through Black Canyon. Though the race organizers were reluctant at first to go with the stage over Cottonwood Pass due to the dirt road, that was the option that was finally selected. Continue reading USA Pro Cycling Challenge: The Riding of Stage 2 – Part 1: Gunnison to Buena Vista

Made in America: Cages Fit for a King

Not much consideration is given to a water bottle cage purchase by the average cyclist, the greatest importance is that there is at least one mounted to their new bike. It is not until they hit the trails and lose a bottle or have to wrestle with the bottle just to pull it out of the cage to get a drink does the thought of a well made water bottle cage come to mind. King Cage, based in Durango, Colorado, has been making water bottle cages the right way since 1991 and making them in America.

Ron Andrews has worked for a unique list of manufacturers in the bicycle industry including Fat City Cycles, One Off Titanium, Joe Breeze Cycles, Ted Wojack Cycles and Yeti Cycles. It was at One Off Titanium that Ran was asked by a customer if they could have a water bottle cage made from titanium. After he successfully made the titanium cage, he continued to produce them ever since Continue reading Made in America: Cages Fit for a King