For 2011, Felt Bicycles is releasing a cruiser that is a little bit different from the norm – instead of being inspired by balloon tired bicycles from the past, it is inspired by motorcycles from the past. The Felt Chief cruiser takes design cues from the early Indian motorcycles up through approximately the late 1920s. The deep red paint, tank frame, gold decals, the typeface, Thick Brick 3” white tires, springer seat and spoked wheels are all details that can be seen in the early Indian Motorcycles. Continue reading Indian Goes Cruising
Author: Brian O'Connor
iBike Cruises into the Apple Store
Velocomp LLP, the makers of the iBike Dash and iBike Phone Booth line of iPhone/iPod Touch cases and cases that convert your iPhone into a cycling computer, is pleased to announce that Apple Computer views their products worthy of selling in the Apple Retail and Apple Store online. On May 9th, they announced that Apple has decided to offer the iBike Dash Cycling Computer, iBike Dash Cycling Computer Deluxe and iBike Phone Booth online and at all of the retail locations. As you might expect, this is big news for a company breaking into the iPhone and iPod accessory market – especially with the recent news that Apple is now considered the most expensive brand in the world. Personally, this is no surprise as the representatives at the iBike Dash booth eluded to being in ‘talks’ with Apple during the 2010 Interbike tradeshow in Las Vegas last September. The surprising part is that it took eight months to get this existing product into the Apple Stores.
You maybe unfamiliar with the iBike Dash and iBike Phone Booth – they are rugged cases designed to work with all generations of the iPod Touch, the iPhone 3/3GS and the iPhone 4. The iBike Phone Booth is strictly a hard sided plastic case that iPod Touch or iPhone device slips into then the user is able to securely attach it onto their bicycle. It offers some of the best weather protection on the market while still allowing the user to operate the device while riding their bike. Continue reading iBike Cruises into the Apple Store
SRAM Powers Up
Back in the beginning of 2006, James Meyer wanted to purchase a power meter for his bike, but Mieke Meyer would not let him make the purchase due to student loans. By mid-2006, Jim convinced Mieke that he could build a power meter and he set out soldiering – 10 hours later he had a prototype. After two years of testing and refinement, production units of the CinQo were finally shipping out to customers. Continue reading SRAM Powers Up
When Race Car and Bicycle Engineers Collaborate
Two years ago the sports car company, McLaren, approached the bicycle manufacturer, Specialized, to collaborate on a bicycle frame project utilizing a material that both companies are familiar with – carbon fiber. McLaren pioneered the carbon fiber monocoque construction technique used in their Formula 1 race cars all the way back in 1981. Since the 1990s, Specialized has been using carbon fiber in their higher end bikes either as main tubes with aluminum lugs or as complete carbon fiber frames. In 2009, McLaren’s Applied Technologies division approached Specialized with the idea of designing a carbon fiber bicycle frame utilizing their years of extensive research and racing know-how to make an even lighter, stiffer and more aerodynamic frame. McLaren hoped they too could learn something from this endeavor to make an even better sports and racing car.
Continue reading When Race Car and Bicycle Engineers Collaborate
Do you Have a Drinking Problem?
When you are out riding your bike, hiking or engaging in any other outdoor activity do you use a hydration backpack to carry your water with you? Have you ever gotten back from an activity and found that your pack was full of water, but you were dehydrated since you did not drink enough?
Or worse, you ran out of water miles from home since you did not know how much was left in your pack and you did not ration your water accordingly? The Flow Meter from CamelBak might be the drinking aid for you.
(Video after the jump)
A Better “Mouse Trap?”
As long as bicycle racing events have been occurring, riders have been using a number of containers to hold water or other liquid nutrients on their bikes. Aluminum canteens, glass bottles, plastic bottles and more recently hydration backpacks, worn on the rider, have been used. Bottles have been mounted or carried on the handlebars, down tube, seat tube, behind the seat or in a jersey pocket.
Hydration backpacks have been worn on the back or as a fanny pack, but usually mounted to the body with the liquid being delivered to the rider’s mouth using a tube. Now the Portland, Oregon company, Shower Pass, is looking to merge the bike mounted bottle with the convenience of the hydration pack delivery system into one unique system. (Video after the jump) Continue reading A Better “Mouse Trap?”
Hands On: The Tool to Pump You Up… in a Pinch
For 2011, Blackburn Design haas introduced a new line of Toolmanator multi-tools for the occasional adjustment or emergency that all of us encounter at some point while cycling. There are three different models in the Toolmanator series, but the one that caught my eye was the Toolmanator 3. Having been actively cycling for over 20 years, I have accumulated quite an assortment of multi-tools and I really did not need another one. The feature that persuaded me to purchase the Toolmanator 3 was the built in Mini Shock Pump… essentially eliminatiing the need to carry a shock pump in my pack. Continue reading Hands On: The Tool to Pump You Up… in a Pinch
Hands On: Hi-Tech Wool Socks
“Wool is warm and stays warm even when it is even wet.” At least this is the type of statement that we heard throughout high school while participating in a Lifetime Activities outdoor program. Instead of playing baseball and football as our sports; we would bike, hike, canoe, go spelunking and rock climb all around Western Pennsylvania, the East Coast and sometimes out even West.
It was often cold and sometimes damp during these activities which is why our instructors insisted on a wool wardrobe for each of us. We would use old wool button down shirts and wool Army surplus pants along with heavy calf-high wool hiking socks. These garments would certainly keep us warm, even when wet, but there was one major drawback – they were itchy! Continue reading Hands On: Hi-Tech Wool Socks
Alpha Bike, a Proof in Concept
Five Mechanical Engineering students from the University of Pennsylvania have developed quite a cutting edge bicycle for their senior project. The Alpha bike has been a year-long project to develop not only a bicycle that whose systems, mechanical and electrical, are completely integrated, but also create a bike that can be shifted from a freewheel to a fixed-gear setup on-the-fly. Geoff Johnson, Lucas Hartman, Katie Savarise, Evan Dvorak and Katie Rohacz worked with adviser Jonathan Fiene to bring the Alpha Bike from a concept to reality.
The most innovate feature of the Alpha Bike is the development of the Switchable Integrated Free-Fixed Transmission or “SWIFT Drive Technology”. The SWIFT Drive uses an electromechanical actuated clutch to allow the rider to switch between a free-wheeling and fixed mode with the flip of a lever. The key component in this system is the electromechanical clutch housed inside the bottom bracket area, which utilizes titanium, aluminum, stainless steel and bronze bushings to maximize strength and minimize weight. Along with the ability to switch between the free and fixed modes, the rider also has the use of 3-speeds incorporated inside the Sturmey-Archer rear hub which is controlled in a more traditional cable actuated fashion – of course integrated into the frame. The SWIFT Drive transmission is connected to the rear hub using a belt which is hidden inside the right-side chainstay. Continue reading Alpha Bike, a Proof in Concept
Bike Industry Magic – Merlin Brand Rebirth Underway
Apparently I have been living under a rock lately, but it appears that one of the first manufacturers of titanium bicycle frames has been sold…again. Back in March the high-end online retailer, Competitive Cyclist of Little Rock, AR, announced that they had negotiated the rights to the Merlin Metalworks from the American Bicycle Group (ABG) based in Chattanooga, TN
Merlin has changed hands multiple times since it was founded in 1986 by Gwyn Jones, Gary Helfrich, and Mike Augspurger in Cambridge, MA followed a year later with the partnership with Tom Kellogg. Back then they were one of the first manufacturers to create titanium bicycle and wheelchair frames using TIG welding to create small, uniform and aesthetically pleasing welds.Merlin has created frames that have been ridden by Lance Armstrong, Greg LeMond, Steve Hegg, Ken Carpenter, Rob Kish (Race Across America 1995 winner) and Bob Hall (the first person to enter the Boston marathon in a wheelchair). Continue reading Bike Industry Magic – Merlin Brand Rebirth Underway
Audi Sports ‘Wood’
Bicycles and automobiles are more intertwined that you may think. Several automobile manufacturers were actually started as bicycle manufacturers or key players dabbled with bicycles before becoming involved with automobiles. The now defunct Pierce-Arrow Motor Corporation started as a bicycle manufacturer and Carlo Maserati got his start in engines while working at a bicycle manufacturer near Milan, Italy. In recent year, Porsche, Ferrari, BMW, Cadillac and Mercedes have lauched their own line of bicycles to more than likely capture additional revenue after they have sold an automobile. The new car owner can buy the hat, jacket, pen, sunglasses…why not the bike? Saab was clever and sold a Saab bicycle that was folding so that it could fit inside your car just in case you could not park near your final destination. Most of the modern bicycles offered by automobile manufacturers are in reality designed and built by bicycle manufacturers. It is possible that the car company designs the bikes and specs the components, but they certainly are not making them. Continue reading Audi Sports ‘Wood’
Colorado “Did it for the Children”
March 29th marked that date that Colorado became the state with the most sweeping law creating guidelines to protect young Coloradoans in the event of a head injury during organized youth athletic events. Colorado Senate Bill 40, also known as the “Jake Snakenberg Youth Concussion Act”, requires that coaches of youths between the ages of 11 and under 19 take a free annual concussion recognition education course. This course is designed to teach these coaches how to recognize the signs of a concussion; what steps to follow if a concussion is suspected in a young athlete; and immediately remove that athlete for the game, competition or practice. The athlete will not be allowed to return to the practice or competition until he or she is evaluated and receives written clearance to play from a health care provider.
Jake Snakenberg, the individual who the CO Senate Bill 40 is named, was a young high school athlete who died in 2004 after being hit in a football game. It is suspected that the injury was compounded by a previous concussion that he suffered which was never diagnosed. Governor John Hickenlooper signed the law on March 29th with Kelli Jantz, Jake’s mother, near by. Colorado Senate Bill 40 will take effect January 1, 2012. Continue reading Colorado “Did it for the Children”
Hands On: Not Off-Camber with this Bike
Is it about time that your current mountain bike needs to be upgraded? Are you looking for a full suspension bike that has decent travel, but is also a bike that you can ride all day, all over the mountain? Like most people, IS money the object (to save)? If you answered ‘yes’, the Camber line of bikes from Specialized might be for you.
The Camber line of bikes is touted by Specialized as being “The best high-performance, high-value trail bike. Perfect as a first ‘fully’ or hard-earned upgrade.” On a recent trip to Northern California, I was able to throw my leg over one of these bikes and hit some familiar trails. I signed a Camber Elite 29 out from the Tam Bikes’s ‘Test’ fleet in Mill Valley and hit some trails on Mt. Tam.
I spend most of my mountain bike days on a 26-inch Moots YBB so I was looking forward to having 4″ of front and rear travel along with the larger 29-inch wheels. We rolled out of my friend’s place and had to ride the pavement for a few miles before hitting the trails. The previous day I had test ridden a Specialized Epic Comp 29, so I was used to some of the features on that bike like the automatic lockout of the rear shock. The Camber is not meant or designed to compete with the Epic line…the top of the line Camber is about $100 less than the bottom of the line Epic 29. Continue reading Hands On: Not Off-Camber with this Bike